Address: 25 # East Road, Danyang City, Jiangsu Province, China

Postal code: 212300
Phone: 86-13511689940
Tel: 86-511-86889808
Fax: 86-511-86563063
Email: sales@dydmtools.com

Other contact: MSN: zjdywd@hotmail.com
Skype: damingtools1
Contact person: Bruce Wang

Home > News > Content

Setting of the description of the cutter wheels

Danyang Daming tools S.L. | Updated: Jul 16, 2015

Cutter wheel is the most commonly used abrasive polishing industry, because of the hardness of grinding wheel, grinding performance, that favor the grinding industry. In the process of grinding wheel using, first wheel cutting wheels, then set, how do you adjust the cutting wheels? Guangzhou jinrui to tell you:

First of all, please check before the wheel cutting machine, confirm if the ultra fine pitch cutting deformation, cracks, collapse and so on.

Secondly, when when the flange is too small or poor accuracy, easy damaged wheels cut, improvement after use.

Thirdly, when you cut the steering wheel's rotation marked with and machine tool rotating in the same direction. While the Court is not strong, it is difficult to play operation of the cutting wheel.

IV, if you use a cutting wheel and short the workpiece does not match, prone to abnormal wear, poor sharpness, heat abnormal and so on.

V, if anomalies are found in the cutting process, must be turned off immediately.

VI, when the Court of fine resin cutting is not sharp, grinding wheel blade. If use may overheat, overload and cause wheel breakage.

VII, turning wheel and cut by hand, is prohibited, or physical contact with his hands cut off wheel.

Eighth, fine resin film cutting is prohibited for grooving or cutting work outside, avoid uneven except load.